Kaivac 2150 | Kaivac Media Library

Lubricating Components

On a weekly basis you will want to lubricate a couple components of your No-Touch Cleaning System to keep them operating at their peak performance. Use WD-40 or White Lithium Grease to lubricate the spray gun and chemical selector valve.

Squeegee Blade Replacement

The squeegee head is one of the most important parts of your Kaivac system to maintain. Fortunately, it’s also one of the easiest to troubleshoot and correct.

Inspect HEPA Filter

How to make sure your HEPA filter is clean and dry.

Squeegee Head Replacement

One of the largest wear and tear components on your No-Touch Cleaning System is the squeegee head. Over time the squeegee head will wear out or break, significantly affecting the performance of you No-Touch Cleaning System. Weekly inspections will help you identify problems with the squeegee head. However, Kaivac recommends that you replace your squeegee head on a monthly basis.

Black Box Replacement

How to replace the Black Box on a No-Touch Cleaning system.

Inspecting Wheels and Casters

Keep your wheels and casters in top shape with periodic inspections.

Chemical Injection

Greg from Kaivac Technical Support walks you through the process of troubleshooting your chemical injection system on a Kaivac No-Touch Cleaning System and the OmniFlex units equipped with a pump box. If you’re having issues with the chemical injection system, these series of tests and fixes should help you resolve them and get your system back in operation.

Float Shut Off

Greg from Kaivac Tech Support explains the purpose of the float shutoff on Kaivac No-Touch Cleaning systems as well as the OmniFlex systems. This video provides some tips for keeping your vacuum at peak performance as well as extending its life.

Gun Maintenance

Greg from Kaivac Technical Support walks you through the process of maintaining and troubleshooting issues related to your spray gun. If you are having issues with the spray pattern of your spray gun or if you can’t get the gun to go from high to low pressure mode, this video will help you get your system back in operation.

Low Pressure

Greg from Kaivac Technical Support walks you through the process of troubleshooting low pressure on your Kaivac No-Touch Cleaning system. If you’re getting water flow through your pump, just not enough pressure, this video will walk you through a series of tests you can run to help you figure out where your problem lies.

Priming the Pump

How to prime the pump on a No-Touch Cleaning system.

Vacuum Troubleshooting

Greg from Kaivac Tech Support walks you through the steps of troubleshooting the vacuum on your Kaivac system. If you’re having trouble with vacuum suction, this video will help you isolate the issue and offers some steps you can take to fix the problem.

Kaivac 2150 Videos